Thursday, September 22, 2016

Thing To Have In Mind When Driving Stick Shift Vehicles

By James Lee


Many people are confused in operating different machines in which have a small difference with the ones they have been using. When have driven an automatic car all your life, it will be hard to driving stick shift car if you have never done this before. Therefore it is important to understand how this works in order to help someone with this type of car when you get them in a problem or when you purchase this model.

To begin with, you are supposed to learn how to drive this model of vehicle when you are free and practice the moves on a place where there are no movements of people. This is to make sure you do not cause accidents in which are fatal and prosecutable. Therefore look for an open ground most probably at play ground during the time when no activities are taking place in the field.

The first thing you have to understand is that the stick shift requires you to select the gears once the one pouring on loses power or need to be supported. When you get inside the car ensure comfort, make sure there is no one in front of the car. Then adjust the seat to the right position where you are able to reach all pedals with no hassle.

By this time, you will be exited which can make you lose control and make an accident. Push the clutch in and engage gear number one which is at furthest corner from the driver seat. Then release hang on to pedal slowly while pushing the accelerator pedal also slowly and the car will start moving. After gaining power, the car will start moving and you should release clasp fully and push the accelerator to a speed you can control.

Release seize slowly and push the accelerator in slowly at the same pace balancing them for locomotive to gain power and start moving the vehicle. Do this until the motion is constant and release the clasp fully making your leg relax on the floor. Do not push the gas too much as this will increase the speed of which is dangerous to people who are not experienced in driving.

After that, release the clutch speedily and push the gas pedal but make sure not to increase the speed when doing so. You need to repeat the same procedure in ensuring to disengage and engage other gears on the road. Therefore be sure of making this tread every time you are out of work and within a few days, you will come to understand all the steps while memorizing them.

After a while, you must stop the car using the instructions given to avoid making the engine stop abruptly. Therefore you must release the accelerator and by using the same leg, apply brakes and start pressing them slowly till you reach to a lower speed then you can push the clutch in fully. The car will stop after some minutes and you will have to turn off the engine. Before turning off, disengage all the gears and pull the handbrake to ensure after releasing the brakes, the vehicle will not move.

When stopping, you have to start by releasing the gas pedal without stepping on the clutch and by the use of the same leg released the gas, step on brakes slowly and wait for the car to get to a lower speed then step on clasp. After stopping, you have to pull the handbrake and then disengage all the gears leaving the car at neutral before switching off the engine.




About the Author:



No comments:

Post a Comment